4K System Restrictions; K System - Sony MVS-8000X User Manual

For inputs, four inputs are grouped in sequence starting
from input 1.
Input connector number
1, 2, 3, 4
5, 6, 7, 8
9, 10, 11, 12
13, 14, 15, 16
(and so on)
For outputs, four odd-numbered outputs and four even-
numbered outputs are grouped in sequence.
Output connector number
1, 3, 5, 7
2, 4, 6, 8
9, 11, 13, 15
10, 12, 14, 16
(and so on)
For details about input/output signal settings, see
"Settings Relating to Signal Inputs" (page 437) and
"Settings Relating to Signal Outputs" (page 443).
Setting the active area of 4K inputs/
outputs
For 4K signal inputs in groups of four and 4K signal
outputs in groups of eight, an active area can be set to
3840×2160 or 4096×2160 for each group.
1
In the Engineering Setup >Switcher >Input menu
(7332), press [Active Area Size].
The Active Area Size menu (7332.4) appears.
2
Select the target input to set.
3
In the <Active Area Size> group, select the active area.
3840×2160: Set to 3840×2160
4096×2160: Set to 4096×2160
Setting number
1
5
9
13
(and so on)
Setting number
1
2
9
10
(and so on)
205
4
In the Engineering Setup >Switcher >Output menu
(7333), press [Active Area Size].
The Active Area Size menu (7333.13) appears.
Set the output active area in the same way as for inputs.
Notes
• For AUX bus outputs set to [4096×2160], only an
[4096×2160] input signal, BLACK signal, or WHITE
signal can be selected.
• For outputs set to [3840×2160], a [4096×2160] input
signal cannot be selected.
• For outputs, only odd-numbered outputs can become the
target for setting, with consecutive odd-numbered and
even-numbered outputs (for example, output 1 and
output 2) having the same setting. Only even-numbered
outputs cannot be set.
• If both the consecutive odd-numbered and even-
numbered outputs are AUX bus outputs, [4096×2160]
can be set.
• [4096×2160] cannot be set on the edit preview bus.

4K System Restrictions

4K systems are subject to the following function and
settings restrictions.
For details about disabled menus due to 4K restrictions,
see "Disabled Menus in 4K Systems" (page 512).
Item Restrictions
• M/E-2 to M/E-4 banks (MVS-8000X),
Functions that
cannot be used in
M/E-1 to M/E-5 banks (MVS-7000X)
the switcher • Key 3 to key 8
• M/E Config other than [Standard]
• Utility 1 and 2 buses
• AUX11 to AUX48 buses
• Multi viewer
• Color corrector
• Side flags
• Format converter
DMEs All functions relating to DME are not
supported
Screen aspect Fixed to 16:9
• Clip transitions not supported
Transitions
• Preset color mix using Utility 2 bus not
supported
• In 2-sample interleave division, a key
1 (key 2) independent key transition
wipe cannot be used when key 1 (key
2) is selected for the next transition
and DME wipe is selected as the
transition type.
a)