Macro Operations (Cross-Point Control Block) - Sony MVS-8000X User Manual

For details about bank selection, see "Bank and
register selection in the Flexi Pad control block"
(page 334).
3
Holding down the [DEL] button, press the button of
the register in which the macro you want to delete is
saved.
Macro Operations (Cross-
Point Control Block)
You can assign the macro register recall function to the
cross-point Flexi Pad buttons or 1st row/2nd row buttons
in utility/shotbox mode on the cross-point control block.
To recall a macro register using 1st row/2nd row
buttons
Assign a macro register to the 1st row/2nd row buttons of
the cross-point control block and then select it in utility/
shotbox mode. The settings are common to the M/E and
PGM/PST banks.
For details about assigning a macro register, see
"Assigning Functions to 1st Row/2nd Row Buttons of the
Cross-Point Control Block" (page 425).
To recall a macro register, you use the same procedure as
executing a utility.
For details, see "Utility Execution (Cross-Point Control
Block)" (page 341).
To recall a macro register using cross-point Flexi
Pad buttons
Assign a macro register to a cross-point Flexi Pad button,
and then press the button to recall the macro register.
You can assign the macro status (number of executed
events and number of total events) display function to
buttons in the cross-point Flexi Pad.
For details about button assignment, see "Assigning a
function to a cross-point Flexi Pad button" (page 430).
360