M/E Configuration Switching (M/E Split); M/E Split Mode Settings; M/E Split Mode Restrictions - Sony MVS-8000X User Manual

M/E Configuration
Switching (M/E Split)
On the MVS-7000X, a single MKS-7210X mix/effect
board can be subdivided into multiple M/Es for use (M/E
split).
2M/E mode, 3M/E mode, or 4M/E mode can be assigned
on up to three boards. It is also possible to set no
assignment.
Using M/E split, you can select the following M/E
configurations.
Number of Number of keys available on a single
assigned M/Es M/E
1 8
2 4
3 M/E-1, M/E-2
PGM/PST
4 2
The mode is referred to as 1M/E mode to 4M/E mode,
depending on the maximum number of M/Es used on a
single MKS-7210X.
Notes
• When three or four M/Es are assigned to a board, the
other two boards are automatically set to [Disable] and
assignment is no longer possible.

M/E Split Mode Restrictions

3M/E mode and 4M/E mode have the following
restrictions.
Classification 3M/E mode
Operation mode All M/Es and
P/P
M/E-1, M/E-2
M/E assignment All M/Es and
P/P
• If the signal format is 1080P, each board is used in 1M/
• In 2M/E mode, DME selection on a single M/E is as

M/E Split Mode Settings

This sets the number of M/Es for each board.
1
2
4
2
3
DSK mode and multi-program 2
mode cannot be set.
[Utility 2] cannot be selected for the
background in multi-program mode.
[Logical M/E Assign] cannot be
used.
207
E mode. However, the number of available keys is four.
follows.
- Two places using a dedicated interface.
- One place using an SDI interface.
Open the Engineering Setup >System >Install/Unit
Config >Unit Config >M/E Split menu (7316.11).
In each of the <M/E Split (1st Board)>, <M/E Split
(2nd Board)>, and <M/E Split (3rd Board)> groups,
select one of [1ME] to [4ME].
To assign no M/Es, select [Disable].
Press [Execute].
4M/E mode
• DSK mode and multi-program 2
All M/Es and
P/P
mode cannot be set.
• [Utility 2] cannot be selected for
the background in multi-program
mode.
All M/Es and [Logical M/E Assign] cannot be
P/P used.