Deleting A Directory; Copying Files Between Unit Ids/Group Ids; Copying Files Between Different Unit; Ids - Sony MVS-8000X User Manual

• Renaming files
• Deleting files
• Offline editing of macro files
• Exporting user source name files
• Creating, renaming, and deleting frame memory folders
• Interconversion of frame memory clips and extended
clips
• Deleting directories
1
Open the File >Configure >Directory menu (7171).
2
In the device selection area, select the target device for
operation (see page 379).
3
Select a directory.
4
Press [Protect].
Write inhibit is set for the selected directory, and
is displayed in the "Protect" field in the status area.

Deleting a Directory

1
Open the File >Configure >Directory menu (7171).
2
In the device selection area, select the target device for
operation (see page 379).
3
Select a directory.
4
Press [Delete].
5
Check the message, then press [Yes].
Copying Files Between
Unit IDs/Group IDs
Switcher and DME files on the local drive or removable
drive are managed by unit ID (see page 389) or group
ID(see page 390).
Files with different unit ID and group ID cannot be copied
using ordinary file operations. To copy files, use the menu
for copying between different unit ID/group IDs.
Note
If there is already data present in the copy destination, note
that all data will be overwritten.

Copying Files Between Different Unit

IDs

1
Open the File >Configure >Unit ID Copy menu
(7172).
2
Press the region selection area at the top right of the
screen and select a category.
For categories you do not want to copy, press the
corresponding button, turning it off.
You can collectively select all categories using [ALL],
switcher-related categories using [SWR ALL], and
DME-related categories using [DME ALL]
3
Press [OK].
4
Select the target device for operation (see page 379).
In the device selection area in the list on the left, select
the copy source device, then specify a directory.
In the device selection area in the list on the right,
select the copy destination device, then specify a
directory.
5
Select the copy source and copy destination unit IDs.
6
Press [t Copy].
7
Check the message, then press [Yes].
Copying Files Between Different
Group IDs
Open the File >Configure >Group ID Copy menu (7173),
and use the same procedure as for copying between unit
IDs.
387