When [Speed] is selected
No.
Parameter Adjustment
1
Speed
Rotation speed of pattern
• A value of –100.00 corresponds
to 4 rpm counterclockwise
rotation.
• A value of +100.00 corresponds
to 4 rpm clockwise rotation.
• A value of 0.00 corresponds to
pause.
Notes
• When a mask effect is applied to a border, the boundary
becomes discontinuous, giving an unnatural effect.
Avoid applying a mask to a border.
• Enabling mosaic or defocus and selecting [Video/Key]
in the <Mosaic/Defocus Mode> group disables mask.
Setting Rotation
Note
Select either X or Y direction for rotation. You cannot
make rotation by combining both directions.
1
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press
[Rotation].
The Rotation menu (1115.6) appears.
3
In the <Rotation> group, select the direction of
rotation.
X: Horizontal rotation
Y: Vertical rotation
4
Set the following parameters.
When [X] is selected
No.
Parameter Adjustment
1
Rotation X
Horizontal key rotation
4
Perspective Perspective
When [Y] is selected
No.
Parameter Adjustment
2
Rotation Y
Vertical key rotation
4
Perspective Perspective
Canceling virtual images
If an extreme degree of perspective is set for an image, the
part of the image exceeding the virtual view point is
displayed wrapped around on the monitor screen.
To hide the virtual image portion, in the M/E-1 >Key1
>Processed Key/Resizer >Rotation menu (1115.6), press
[Wrap Around], turning it on.
123