Rear View - Sony MVS-8000X User Manual

Rear view

MKS-X7700
g REMOTE 1 to 6 connectors
(when MKS-X7702 is installed)
h SERIAL TALLY 1 and 2 connectors
a U (signal ground) terminal
Connect to the system ground.
b -AC IN (AC power input) A and B connectors (3-
pin)
Connect to 100 V to 240 V AC power supply with the
optional AC power cords.
g REMOTE 1 to 6 connectors
j TALLY/GPI IN 1 to 34 connectors
i TALLY/GPI OUT 1 to 36 connectors
i TALLY/GPI OUT 1 to 54 connectors
j TALLY/GPI IN 1 to 68 connectors
c REF IN connectors
d UTIL connector
e MVS connector
f S-BUS connector
(when MKS-X7701 is installed)
c REF IN connectors
d UTIL connector
e MVS connector
f S-BUS connector
The unit is equipped with two power supplies. When A or
B power supply is normal, unit operation can proceed.
c REF IN (reference video signal input) connectors
(BNC type)
Connect to an external signal source when syncing the unit
to an external sync signal. For HDTV, connect a HD tri-
level sync signal, black burst signal, or analog sync signal.
64
b -AC IN A and B
connectors
a U terminal
b -AC IN A and B
connectors
g REMOTE 1 to 4 connectors