Shotbox Overview - Sony MVS-8000X User Manual

1
Press [2-ROW UTIL/SBOX1] in the cross-point Flexi
Pad.
2
Press the cross-point button with the registered action
you want to execute in the 2nd row.
• For actions that enable/disable a function, the
selected button is lit amber, and the function is
enabled. To disable the function, press the button
again.
• For other actions, the function for the selected button
is executed.

Shotbox Overview

The term "shotbox" refers to a function whereby for each
specified region, any snapshot or keyframe effect can be
recalled simultaneously.
The areas for storing specifications of target regions,
snapshots, or keyframe effects to recall simultaneously are
called "registers," and there are 99 registers for each
control panel.
The diagram above shows the settings in the 99 shotbox
registers, conceptually.
Each register may contain any combination of target
region with the snapshots or effects to be recalled.
The Auto Run function is an attribute which can be set for
each register. When enabled, an effect recalled by
executing a shotbox operation is automatically executed.
• When register 1 is executed, this recalls M/E-1 snapshot
1, User2 effect 5, and DME ch3 effect 1. Auto run is
enabled for register 1, hence User2 and DME ch3 effects
are executed at the same time they are recalled.
• When register 3 is executed, M/E-1 effect 1, P/P effect
90, and User1 effect 1 are recalled. Auto run is disabled
for register 3, hence you must press the [RUN] button in
the utility/shotbox control block to execute the effects.
343