Noise Filter - YASKAWA UAK series User Manual

2.3.6 Noise Filter

A noise filter installed on the power supply side eliminates noise leaking from the main circuit power line to
the Σ-V-SD driver. The filter also reduces the noise leaking from the Σ-V-SD driver to the main circuit power
line.
Use a noise filter designed to suppress harmonic noise. Do not use general-purpose noise filters, because their
effectiveness is minimal when used with the Σ-V-SD driver.
Install a noise filter at the input side of the power regeneration converter.
Yaskawa recommends the following noise filters. For details, refer to 5.4 Noise Filter.
Power Regeneration Converter
Input Voltage
Three-phase,
200 VAC
Three-phase,
400 VAC
∗
Also use the following compact AC power supply block-type capacitor (X capacitor).
Compact AC power supply block-type capacitor (X capacitor) model: LDA106M-AA (from Soshin Electric Co., Ltd.)
Noise Filter Model
Model
CACP-JU15A3 HF3060C-SZC-47EDD
CACP-JU19A3 HF3080C-SZC-47EDD
CACP-JU22A3 HF3100C-SZC-47EDD
CACP-JU30A3 HF3150C-SZC-47EDD
CACP-JU45A3B
HF3200C-SZC-49EDE
CACP-JU15D3 HF3030C-SZC-47DDD
CACP-JU19D3 HF3040C-SZC-47EDD
CACP-JU22D3 HF3050C-SZC-47EDD
Some noise filters have large leakage currents. Leakage current is also greatly affected
by ground conditions. If you use a ground fault detector, consider the ground conditions
and the leakage current of the noise filter when you select one.
Ask the manufacturer of the noise filter for details.
2.3 Peripheral Devices
*
2
2-23