7.2.4 Local Bus
A local bus communication cable connects the power regeneration converter (CN5) and SERVOPACK
(CN5A and CN5B).
Local bus
communication
cable
CN5
Power
regeneration
converter
∗
Connect only one resistor on the SERVOPACK on the right.
If you connect two or more SERVOPACKs to one power regeneration converter, do not
set the same value for the rightmost digit of the SERVOPACK address in Pn010
(5C00h).
For details, refer to 8.4.8 Setting Local Bus Addresses.
7.2 Σ-V-SD Driver
Local bus
terminating resistor *
CN5A/B
SERVOPACK
7
7-27