YASKAWA UAK series User Manual page 136

• Connections of Serial Encoder in Terminal Box
Serial converter unit
Note 1. When tightening No.4-40 UNC screws, the positioning hinders inserting the screwdriver. Make sure that the
screws are not inserted at an angle.
2. Ensure that stress is not applied to the connection areas of the cables and plug housings when cables are secured
using Insulock binders.
3. Make sure that the signal lines and shield wires do not become stuck in the protective cover.
4. The depth for M4 screws is 7 mm max.
2-M4 socket head cap screws
Protective cover
2-No.4-40 UNC screws
Approx. 40 mm
Plug housing : JEC-9P
Insulock (with head)
M4 screw
Cable
(serial data output side)
7.1 Motors
Shield wires
M4 ground screw
7
7-11