YASKAWA UAK series User Manual page 192

7.
Return to the SigmaWin for Σ-V-SD (MT) component main window. To make the settings for the
motor, click Setup and then click Multi-Turn Limit Setting again. A verification message
appears confirming if you want to continue although the position data will change.
8.
Click Continue, and the Multi-Turn Limit Setting box appears. To change the settings, click Re-
Change.
9.
To save the settings, click Writing into the Motor, and a warning message appears.
10.
Click OK.
8.7 Absolute Encoders
8
8-35