YASKAWA UAK series User Manual page 41

2 Compatible Devices
2.2.3 Σ-V-SD Driver
(2) Cable Specifications for 24-volt Control Power Supply (With loose leads at one end
and connects a Σ-V-SD driver to a 24-volt control power supply)
Order No. *
Cable Length
Cable and
Connector
∗
Specify the cable length in
Example: JZSP-CNG00-01-E (1 m)
(3) Cable Specifications for 24-volt Control Power Supply (With connectors on both
ends and connects two Σ-V-SD drivers)
Order No.
Cable Length
Cable and
Connector
∗1. Specify the cable length in
Example: JZSP-CNG01-A2-E (0.2 m)
∗2. Use a cable with a length of 0.3 m for the CACP-JU45A3B converter.
(4) Cable Specifications for Local Bus Communications
Order No.
Cable Length
Cable
Remarks
(5) Cable Specifications for Terminating Resistor of the Local Bus
Order No.
Remarks
(6) Cable Specifications for Converter I/O Signals
Order No. *
Cable Length
Cable and
Connector
Remarks
∗
Specify the cable length in
Example: JZSP-CJI01-01-E (1 m)
2-18
Items
JZSP-CNG00-
1 m, 2 m, 3 m
Cable: UL1015 AWG14
Cable-end connector to driver: 175362-1 (PIN : 353717-2)
of the order number.
Items
*1
JZSP-CNG01-A -E
*2
0.2 m or 0.3 m
Cable: UL1015 AWG14
Connector: 175362-1 (PIN : 353717-2)
Connector manufacturer: Tyco Electronics Japan G.K.
of the order number.
Items
JUPIT-W6004-A5
0.5 m
HRZFVV-ESB (20276)
The total number of cables must equal to the total number of SERVOPACKs
used.
Items
JUPIT-W6024
Connect the terminating resistor only to the SERVOPACK on the far right.
Items
JZSP-CJI01-
1 m, 2 m, 3 m
Cable: HP-SB/20276SR #28×6P
Cable-end connector for external device: 10114-6000EL (Crimping type)
Used for emergency stop and the MCONs.
of the order number.
Specifications
-E
Specifications
Specifications
Specifications
Specifications
-E