YASKAWA UAK series User Manual page 36

• Cable-end connectors to servomotors
Waterproof Straight Plug
Servomotor's
Capacity
Receptacle for
kW
Main Circuit
0.85
CE05-2A18-
1.3
10PD-D
1.8
2.9
CE05-2A22-
4.4 22PD-D
5.5
CE05-2A32-
17PD-D
7.5
• Cable-end connectors for brake power supply
Straight Plug
Servomotor's
Capacity Receptacle for
kW Brake Power
Supply
0.85
to CM10-R2P-D
7.5
Note: For the brake power cable, the cable-end connectors are available from Yaskawa Control Co., Ltd. Use the following
order number when ordering.
J Z S P - C V B 9 - S M S 2 - E
Connector Type
S: Straight plug
A: L-shaped plug
∗1. The standard kit includes medium size connectors.
∗2. Use the following crimping tool made by DDK Ltd.: 357J-50448T
For details, contact DDK.
Waterproof L-shaped Waterproof Cable Clamp
Plug
Cable-end Connectors to Servomotors (Not included)
Waterproof Waterproof
Straight L-shaped
Plug Plug
CE05-6A18- CE05-8A18-
10SD-D-BSS 10SD-D-BAS
CE05-6A22- CE05-8A22-
22SD-D-BSS 22SD-D-BAS
CE05-6A32- CE05-8A32-
17SD-D-BSS 17SD-D-BAS
L-shaped Plug
Cable-end Connectors for Braker Power Supply (Not included)
Straight Plug
CM10-SP2S-S-D
Applicable Cable:
4.0 mm dia. to 6.0 mm dia.
CM10-SP2S-M-D
Applicable Cable:
6.0 mm dia. to 9.0 mm dia.
CM10-SP2S-L-D
Applicable Cable:
9.0 mm dia. to 11.6 mm dia.
*
1
Bush Size (Diameter: mm)
S : Size S (4.0 to 6.0)
M: Size M (6.0 to 9.0)
L : Size L (9.0 to 11.6)
Waterproof Applicable Cable
Cable Clamp Diameter (mm)
CE3057-10A-1-D 10.5 to 14.1
CE3057-10A-2-D 8.5 to 11.0
CE3057-10A-3-D 6.5 to 8.7
CE3057-12A-1-D 12.5 to 16.0
CE3057-12A-2-D 9.5 to 13.0
CE3057-12A-3-D 6.8 to 10.0
CE3057-12A-7-D 14.5 to 17.0
CE3057-20A-1-D 22 to 23.8
CE3057-20A-2-D 24 to 26.6
CE3057-20A-3-D 22 to 22.5
L-shaped Plug
CM10-AP2S-S-D
Applicable Cable:
4.0 mm dia. to 6.0 mm dia.
CM10-AP2S-M-D
Applicable Cable:
6.0 mm dia. to 9.0 mm dia.
CM10-AP2S-L-D
Applicable Cable:
9.0 mm dia. to 11.6 mm dia.
Contact Pin Type
S2: Soldered
2
C3: Crimped type*
2.2 Selecting Cables
Manufacturer
DDK Ltd.
2
Manufacturer
DDK Ltd.
2-13