YASKAWA UAK series User Manual page 28

(2) Pulse Encoder Cable
Name
Pulse Encoder Cable
for Spindle Motor
Use the following information to select appropriate parts when assembling a pulse encoder cable.
Specifications for cable-end connectors to SERVOPACKs
Name
Connector Plug
Electrical Contact
Note: This cable-end connector is equivalent to and can be used as substitute for the 10120-6000LE connector made by
Sumitomo 3M Ltd.
Specifications for cable-end connectors to spindle motors
The cable-end connector to the spindle motor is stored in the motor's terminal box upon delivery.
Name
Connector
Other pins
Electrical
Contact
No.10 pin
∗
The YC-202 crimping tool is required. Contact J.T.S. Mfg. Co., Ltd. for more information.
Cable specifications
Items
Order No.
General Specifications
Finished Dimensions
Internal Configuration and
Lead Color
Available Cable Lengths
(Yaskawa Standards)
Length Order No.
2 m JZSP-CJP00-02-E
3 m JZSP-CJP00-03-E
5 m JZSP-CJP00-05-E
10 m JZSP-CJP00-10-E
15 m JZSP-CJP00-15-E
20 m JZSP-CJP00-20-E
Model
54331-0201
54306-2019
Model
ELP-12V
*
LLF-01T-P1.3E
*
LLF-41T-P1.3E
Standard Type
B9400064-1-E (3 m)
B9400064-2-E (5 m)
B9400064-3-E (10 m)
B9400064-4-E (15 m)
B9400064-5-E (20 m)
KQVV-SW:
AWG22×3 (three colors)
AWG26×4 (four twisted-pair)
7.5 mm dia.
F1
A1
F4 F2
A3 A2
F3
A1: Red
A2: Black
A3: Yellow green
F1: Blue and white - twisted-pair wire
F2: Yellow and white - twisted pair wire
F3: Green and white - twisted pair wire
F4: Orange and white - twisted pair wire
3 m, 5 m
2.2 Selecting Cables
External Appearance
To SERVOPACK
Manufacturer
Molex Japan Co., Ltd.
Manufacturer
J.T.S Mfg. Co., Ltd.
To spindle motor
2
2-5