Download  Print this page

Advertisement

10. Using the Wi-Fi/Bluetooth function

[Wi-Fi Setup] Menu

Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
>
[Setup] > [Wi-Fi] > [Wi-Fi Setup]
MENU
[Priority of Remote Device]
Sets either the camera or the smartphone as the priority control device to be used during
remote recording.
(P262)
[Wi-Fi Password]
You can improve security by enabling password entry for a direct connection to a
smartphone.
[ON]
Connects the camera and a smartphone using an SSID and password.
[OFF]
Connects the camera and a smartphone using an SSID.
• When [ON] is selected, you can also set up a connection by scanning a QR code.
[LUMIX CLUB]
Acquires or changes the "LUMIX CLUB" login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as the destination PC is
required.
(The default setting is "WORKGROUP".)
1 Press [MENU/SET].
2 Enter the workgroup of the connecting PC.
• For information on how to enter characters, refer to P64.
• To reset to the default setting, press [DISP.].
(P282)
291
(P257)
(P256)

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: