Download  Print this page


11. Connecting to other equipment

Print Settings

Select and set the items both on the screen in step
printing it" and in step
[Print with Date]
[Num.of prints]
[Paper Size]
[Page Layout]
• When you want to print pictures on a paper size or a layout which is not supported by the
camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on
the printer.
(For details, refer to the operating instructions of the printer.)
• If the printer does not support date printing, the date cannot be printed on the picture.
• Depending on the printer, the date print settings of the printer may take precedence so check if
this is the case.
• The camera is receiving an error message from the printer when the [¥] indication lights
yellow during printing. After finishing printing, make sure there are no problems with the
• If the number of prints is high, the pictures may be printed several times. In this case, the
remaining number of prints indicated may differ from the number set.
• Only pictures taken in JPEG format can be printed. Those taken in RAW will use the JPEG
pictures that were simultaneously created. If an equivalent JPEG picture is not available, no
print will take place.
of the "Selecting multiple pictures and printing them" procedures.
Sets date printing.
Sets the number of pictures to be printed (up to 999 pictures).
Sets the paper size.
Sets whether or not to add borders and how many pictures to be
printed on each sheet of paper.
of the "Selecting a single picture and


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: