Download  Print this page

Advertisement

9. Using Menu Functions
[Eye Sensor]
[Sensitivity]
This will set the sensitivity of the eye sensor.
This will set the method for switching between the monitor and viewfinder.
[LVF/MON AUTO] (automatic switching between the monitor and
[LVF/Monitor
viewfinder)/
Switch]
[LVF] (viewfinder)/[MON] (monitor)
• If you press [LVF] to switch the display, the [LVF/Monitor Switch] setting will
also switch.
[USB Mode]
Sets the communication method when connecting using the USB connection cable
(supplied).
y [Select on
connection]
z [PC(Storage)]
[PC(Tether)]
{ [PictBridge(PTP)] Select this setting when connecting to a printer supporting PictBridge.
[USB Power Supply]
Supplies power via the USB connection cable when the camera is connected to a PC.
• Even if this item is set to [OFF], power will be supplied when the AC adaptor (supplied) is
connected.
Select this setting to select the USB communication system when
connecting to another device.
Select this setting to export images to a connected PC.
Select this setting to control the camera from a PC installed with
supported software.
226

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: