2. Getting Started/Basic Operations
The joystick provides the same functions as the cursor
Selection of items or setting of values etc., is
Confirmation of setting contents, etc., is
• In these operating instructions, the up, down, left and
right of the joystick are expressed as 3/4/2/1.
Changing the function to be used while the recording screen is displayed
You can switch to the camera setting that enables the assigned function.
You can set the items to be assigned to the function lever in [Fn Lever Setting] in the
[Custom] ([Operation]) menu.
Change the function lever position.
• Assigned functions may not operate, depending on the mode selected or the screen
[Operation] > [Joystick Setting]
Allows you to move the display positions of the AF area and MF
Uses a function assigned in [Fn Button Set].
Displays the menu when the joystick is pressed.
• Operations that can be performed by moving the joystick are
Disables the joystick.
The normal setting where the assigned
function is disabled.
The setting where the assigned function is