Panasonic Lumix DC-G9 Operating Instructions For Advanced Features page 267

10. Using the Wi-Fi/Bluetooth function
Running a backup
Preparations:
• Set the camera to a state in which it can be turned on with the smartphone (standby state).
(P260)
– Camera: [Bluetooth] and [Remote Wakeup] are set to [ON].
– Camera: The Camera On/Off switch is set to [OFF].
• Camera: The card's Write-Protect switch is not set to [LOCK].
Start up the "Image App" in foreground (a state in which the app can be operated),
and run a backup.
• A backup will start if the smartphone is connected to the wireless access point set up in (Setup
3).
• It may be possible to run a backup even if the app is running in background (a state in which it
cannot be operated).
• The first job backs up all images on the card. The second and subsequent jobs back up only
those that have not been backed up yet.
• If you change the backup destination, images that have already been backed up are not
saved to a new destination.
• A backup job will stop in the following cases:
– When you set the camera on/off switch to [ON]
– When you remove or insert the card
– During USB charging (The job restarts when charging has completed)
– When the battery runs out of power (The job will resume after the battery is recharged.)
• You cannot back up the following types of images:
– Motion pictures
– 6K/4K burst files
– Images recorded with the Post Focus function
– Images recorded with the [High Resolution Mode]
267