Panasonic Lumix DC-G9 Operating Instructions For Advanced Features page 96

4. Focus, Brightness (Exposure) and Colour tone Settings
When selecting [
Touch operation
Drag your finger over the parts you want to set as AF
areas.
• To cancel the selection of a particular AF area, touch the
area again.
Button operation
Press 3/4/2/1 to select the AF area, and then press [MENU/SET] to set (repeat).
• The setting is cancelled when [MENU/SET] is pressed again.
• To cancel all selections, press [DISP.].
Press [Fn1] to set.
Registering the set AF area to [
∫
1 On the screen in step
2 Press 3/4 to select a destination to which the setting will be registered, and press
[MENU/SET].
• Turning off this unit will return the setting adjusted with [
setting.
Restrictions on Auto Focus Mode
∫
• The AF Mode is fixed to [Ø] in the following cases.
– When using the Digital Zoom
– [Miniature Effect] (Creative Control Mode)
• The Auto Focus Mode is fixed to [š] when [4K Live Cropping] is set.
• It cannot be set the Auto Focus Mode in the following cases.
– When recording with the Post Focus function
([Face/Eye Detection])
• If no faces or human bodies are detected, the AF Mode operates as [
([Tracking])
• In situations where AF Tracking does not work correctly due to certain recording conditions,
such as when the subject is small or the location is dark, the operation of [Ø] is performed.
• [ ] cannot be used with [Time Lapse Shot].
• In the following cases, [
– [Sepia]/[Monochrome]/[Dynamic Monochrome]/[Rough Monochrome]/[Silky Monochrome]/
[Soft Focus]/[Star Filter]/[Sunshine] (Creative Control Mode)
– [Monochrome]/[L.Monochrome] ([Photo Style])
([225-Area]), , etc. ([Custom Multi])
• AF areas at the centre are brought into focus during 6K/4K photo recording or motion picture
recording using [Continuous AF].
([Pinpoint])
• In the following case, [
– When recording motion pictures
– When recording 6K/4K photos
• It cannot be set to [
– [AFF]/[AFC] (Focus Mode)
]/[ ]/[ ]
], [
3
on P95, press 3 .
] operates as [Ø].
] operates as [Ø].
] in the following cases.
] or [ ]
]/[ ]/[
96
] back to the default
].