Monitor Luminance - Panasonic Lumix DC-G9 Operating Instructions For Advanced Features

9. Using Menu Functions
[Monitor Display]/[Viewfinder]
Brightness, colour, or red or blue tint of the Monitor/viewfinder is adjusted.
1
Select the settings by pressing 3/4, and adjust with 2/1.
2
Press [MENU/SET] to set.
• It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is
in use.
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.

[Monitor Luminance]

„ [AUTO]
...
[MODE1]
1
...
[MODE2]
2
...
[MODE3]
3
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
• The monitor automatically returns to standard brightness if no operations are performed for
30 seconds when recording in [MODE1]. It will light up brightly again with button or touch
operation.
• When [AUTO] or [MODE1] is set, the usage time is reduced.
• [AUTO] is only available in the Recording Mode.
• The initial setting when using the AC adaptor (optional) is [MODE2].
Not available in these cases:
• [Monitor Luminance] is not available when [Night Mode] is set.
[Status-LCD Backlight]
[H]
[L]
[OFF]
The brightness is adjusted automatically depending on how bright it is
around the camera.
Make the monitor brighter.
Set the monitor to the standard brightness.
Make the monitor darker.
Brightens the status LCD backlight.
Dims the status LCD backlight.
Turns off the status LCD backlight.
225