Table of Contents
Advertisement
11. Using the Wi-Fi function
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu.
(P53)
>
[Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set
MENU
[Wi-Fi Password]
•
When [ON] is selected, you can also set up a connection by scanning a QR code. (P257,
[LUMIX CLUB]
•
P284
Refer to
for details.
[PC Connection]
•
For details on how to enter characters, refer to
•
If you are using the PC with standard settings, you do not need to change the workgroup.
[Device Name]
You can improve security by enabling password entry for a direct
connection to a smartphone.
[ON]:
Connects the camera and a smartphone using an SSID and
password.
(P257)
[OFF]:
Connects the camera and a smartphone using an SSID.
Acquires or changes the "LUMIX CLUB" login ID.
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is "WORKGROUP".)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
You can change the name of this unit.
1
Press [DISP.].
2
Enter the desired device name.
•
For details on how to enter characters, refer to
section on P69.
•
A maximum of 32 characters can be entered.
298
"
"
Entering Text
section on P69.
(P256)
259)
"
"
Entering Text
Advertisement
Table of Contents
