How to Use the [Wi-Fi Setup] Menu
For details on how to select the [Wi-Fi] menu settings, refer to P44.
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].
2
Press 3/4 to select item, and press [MENU/SET].
[Smart Transfer]
•
P159
Refer to
for details.
[LUMIX CLUB]
•
P163
Refer to
for details.
[PC Connection]
•
For details on how to enter characters, refer to
•
If you are using the PC with standard settings, you do not need to change the workgroup.
[Device Name]
•
For details on how to enter characters, refer to
•
Up to 32 characters can be entered for [A], [a], [1], and [&].
Acquires or changes the "LUMIX CLUB" login ID.
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as the
destination PC is required.
(The default setting is "WORKGROUP".)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Close the menu after changing settings.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
You can change the name of this unit.
1
Press [DISP.].
2
Enter the desired device name.
Wi-Fi
—
"
"
Entering Text
section on P80.
"
"
Entering Text
section on P80.
- 168 -
(P44)