Download  Print this page


2. Getting Started/Basic Operations
[CHARGE] indicator
Charging has completed.
(After charging is complete, disconnect the AC adaptor (supplied) from
the power outlet and remove the battery.)
• When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF).
– The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Charging time
When the charger (supplied) is used
Charging time
• The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not been
used for a long time may be longer than normal.
Battery indication
• The battery level indicated on the screen is approximate. The exact level varies depending on
the environment and the operating conditions.
• Do not leave any metal items (such as clips) near the contact areas of the power plug.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.
• Do not use any other USB connection cables except the supplied one.
This may cause malfunction.
• Do not use any other AC adaptors except the supplied one.
This may cause malfunction.
• Do not use a USB extension cable.
• Do not use the AC adaptor (supplied) and the USB connection cable (for charger) for other
devices. Doing so may cause malfunction.
• The AC adaptor is in the standby condition when the mains plug is connected. The primary
circuit is always "live" as long as the mains plug is connected to an electrical outlet.
A Monitor
B Status LCD
Blinking red
Approx. 190 min
75% or higher
74% to 50%
49% to 25%
24% or below
Low battery
• Recharge the battery or replace it
with a fully charged battery.


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: