Download  Print this page

Advertisement

3. Recording Modes

[Intelligent Auto] menu

Set the functions available only for Intelligent Auto Plus Mode and Intelligent Auto Mode.
>
[Intelligent Auto]
MENU
Taking handheld shots of night scenes ([iHandheld Night Shot])
When [
] is detected while taking handheld night shots, pictures of the night scenery will
be taken at a high burst speed and composed into a single picture.
>
[Intelligent Auto] > [iHandheld Night Shot] > [ON]/[OFF]
MENU
• The angle of view will be slightly narrower.
• Do not move the camera during the continuous shooting after pressing the shutter button.
• Flash is fixed to [Œ] (forced flash off).
Combining pictures into a single picture with rich gradation ([iHDR])
When there is, for example, strong contrast between the background and the subject,
multiple still pictures are recorded with differing exposures and combined to create a
single still picture rich in gradation.
[iHDR] works automatically as needed. When it does, [
>
[Intelligent Auto] > [iHDR] > [ON]/[OFF]
MENU
• The angle of view will be slightly narrower.
• Do not move the camera during the continuous shooting after pressing the shutter button.
• You cannot take the next picture until the combination of pictures is complete.
• A moving subject may be recorded with unnatural blurs.
Not available in these cases:
• [iHandheld Night Shot]/[iHDR] do not work for the pictures taken during a motion picture
recording.
• [iHandheld Night Shot]/[iHDR] are not available in the following cases:
– When recording 6K/4K photos
– When recording with the Post
Focus function
– When recording in Burst Mode
– When recording with the Bracket
function
• [iHDR] is not available in the following cases:
– When recording using the flash
– When [Quality] is set to [
– When [Ex. Tele Conv.] in the [Rec] menu is set
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when
[Auto Shooting] is set)
68
] is displayed on the screen.
], [
] or [
]

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: