10. Using the Wi-Fi/Bluetooth function
Connecting the camera and another device directly (direct connection)
• Please also refer to the operating instructions of the device to be connected.
On the camera, select [WPS (Push-Button)].
Set the device to WPS mode.
• You can wait longer for a connection by pressing [DISP.] on this
[WPS (PIN code)]
On the camera, select [WPS (PIN code)].
Enter the PIN code of the device into this camera.
Enter the SSID and password into
the device. The SSID and
password are displayed on the
connection waiting screen of this
• If the destination is set to
[Smartphone], the password is not
displayed. Select the SSID to
establish a connection.