Download  Print this page

Advertisement

9. Using Menu Functions
[Center Marker]
The centre of the recording screen will be displayed as [+].
[Highlight]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
• If there are any white saturated areas, we recommend compensating the exposure towards
negative referring to the histogram and then taking the picture again. It may result in a better
quality picture.
• This function is disabled during 6K/4K photo playback, playback of images recorded with the
Post Focus function, Multi Playback, Calendar Playback, or Playback Zoom.
[Zebra Pattern]
Indicates parts that may become white saturated through overexposure in a zebra pattern.
[ZEBRA1]
Select [SET] to set the brightness to be processed as a zebra pattern.
• You can select a brightness value between [50%] and [105%]. In [Zebra 2], you can select
[OFF]. If you select [100%] or [105%], only the areas that are already white saturated are
displayed in a zebra pattern. The smaller the value is, the wider the brightness range to be
processed as a zebra pattern will be.
• If there are any white saturated areas, we recommend compensating the exposure towards
negative referring to the histogram and then taking the picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] in the [Custom] ([Operation]) menu, each time
you press the function button to which the setting is assigned, the zebra pattern toggles as
follows:
>
[Zebra 1]
[Zebra 2]
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1]
you to switch the setting quickly.
>
[OFF].
[ZEBRA2]
214
>
[OFF], allowing

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: