Enter/Exit Programming Mode
USB OEM Additional Interface Options
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any
Complete the programming sequence by scanning the Enter/Exit Programming
Mode barcode
055100(CR)
USB OEM Interfaces Option2 =
Disable scanner at first enumeration after BusReset
80
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
USB OEM Additional Interface Options
055101(CR)
USB OEM Interfaces Option2 =
Enable scanner at first enumeration after BusReset
DEFAULT
Magellan™ 1500i