USB INTERFACE FEATURES
USB OEM Additional Interface Options
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any unused bar‐
Complete the programming sequence by scanning the Enter/Exit Programming Mode bar‐
code
055100(CR)
USB OEM Interfaces Option2 =
Disable scanner at first enumeration after BusReset
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
ENTER/EXIT PROGRAMMING MODE
055101(CR)
USB OEM Interfaces Option2 =
Enable scanner at first enumeration after BusReset
DEFAULT
89