Reading Illumination Duration - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

Reading Illumination Duration

This feature specifies how long the illumination stays on after a label or label
segment is read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
04EB3C(CR)
Reading Illumination Duration = 3 Seconds
DEFAULT
44
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Reading Illumination Duration
04EB14(CR)
Reading Illumination Duration = 1 Seconds
04EB64(CR)
Reading Illumination Duration = 5 Seconds
Magellan™ 1500i