Table of Contents
Advertisement
LS2200
3 READING FEATURES
3.1 PERFORMANCE CONTROLS
LS2200 is fully controlled by its decoder, which is completely configurable
from a host computer through the WINHOST™ utility program provided on
diskette with the device, or through ESC sequences via the serial interface.
The decoder controls barcode reading, serial port interfacing, data formatting
and many other operating and control parameters related to the scanner
connected such as:
SCANNER POWER (*)
This command shuts down power to the LS2200 circuitry in order to reduce
overall system power consumption. The possible values are ON and OFF.
The maximum delay between "power off" and the ready state of the scanner
(power on), depends on the selected scanning speed:
•
for 500 scans/sec the delay is 1 second
•
for 1000 scans/sec the delay is 2 seconds
BEAM SHUTTER
This command turns the LS2200 laser off and can be used:
•
to increase the overall laser diode life when used in high ambient
temperature applications (over 35° C).
•
to reduce power consumption
•
to turn off the laser for safety purposes
10 - Reading Features
DATALOGIC
Advertisement
Table of Contents
