Reading Illumination Duration - Datalogic Magellan 1500i Product Reference Manual

Reading Illumination Duration

This feature specifies how long the illumination stays on after a label or label segment is
read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
04EB3C(CR)
Reading Illumination Duration = 3 Seconds
DEFAULT
PRODUCT REFERENCE GUIDE
ENTER/EXIT PROGRAMMING MODE
04EB14(CR)
Reading Illumination Duration = 1 Seconds
04EB64(CR)
Reading Illumination Duration = 5 Seconds
53