Code 93 Stitching - Datalogic Magellan 8300 Product Reference Manual

Hide thumbs Also See for Magellan 8300:

Table of Contents

Code 93 Stitching

Product Reference Guide

Enables/disables stitching for Code 93 labels. When parts of a Code

93 bar code are presented to the scanner with this feature enabled,

the bar code parts will be assembled by the scanner's software, and

the data will be decoded if all bar code proofing requirements are

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to

cover any unused bar codes on this and the facing page to

ensure that the scanner reads only the bar code you intend to

Complete the programming sequence by scanning the SWITCH bar

CODE 93 STITCHING = DISABLE

CODE 93 STITCHING = ENABLE

Code 93 Enable

Magellan 8400