Symbologies
Code 93 — continued
Length Control
Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
START / END
Fixed Length Decoding
Code 93 Length 1, Length 2 Programming Instructions
1. See
START / END
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 2
122
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
PROGRAMMING bar codes
Length 1, Length 2 Programming Instructions on page 154
.
setting this feature
For Code 93 bar codes, only the data characters
are included in the length calculations.
NOTE
PROGRAMMING bar codes
Variable Length Decoding
DEFAULT
for detailed instructions on
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 50
Magellan
TM
3200VSi