Code 93 Length Control - Datalogic Magellan 8300 Product Reference Manual

Hide thumbs Also See for Magellan 8300:

Table of Contents

Code 93 Length Control

Product Reference Guide

This feature specifies whether variable-length or fixed-length

decoding will be set for Code 93.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to

cover any unused bar codes on this and the facing page to

ensure that the scanner reads only the bar code you intend to

3. Complete the programming sequence by scanning the SWITCH

You must now set the features Code 93 Length 1 on page 432 and

Code 93 Length 2 on page 433

CODE 93 LENGTH CONTROL = VARIABLE-LENGTH

CODE 93 LENGTH CONTROL = FIXED-LENGTH

Code 93 Enable

Magellan 8400