Enter/Exit Programming Mode
Expand Code128 to Code 39
Enables/disables expansion of Code 128 labels to Code 39.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
069601(CR)
Expand Code128 to Code 39 = Enable
310
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
069600(CR)
Expand Code128 to Code 39 = Disable
Magellan™ 9800i Scanner