UPC/EAN Guard Insertion
This setting enables the insertion of either a missing leading or trailing guard to a scanned bar
code.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
DEFAULT
054001(CR)
UPC/EAN Guard Insertion = Enable
Product Reference Guide
Enter/Exit Programming Mode
054000(CR)
UPC/EAN Guard Insertion = Disable
265