Ean-8 Guard Insertion - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

EAN-8 Guard Insertion

This setting enables the insertion of either a missing leading or trailing guard
to a scanned barcode.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
054301(CR)
EAN-8 Guard Insertion = Enable
140
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
EAN-8 Guard Insertion
054300(CR)
EAN-8 Guard Insertion = Disable
Magellan™ 1500i