Ean-8/Jan-8 Guard Insertion - Datalogic Magellan 8300 Product Reference Manual

EAN-8/JAN-8 Guard Insertion

290
Enables/Disables the ability of the scanner to insert a guard pattern
into an otherwise complete EAN-8 segment it has received.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN-8/JAN-8 GUARD INSERTION = DISABLE
EAN-8/JAN-8 GUARD INSERTION = ENABLE
Magellan™ 8300/8400