If Not Connected To A Network - Canon iR4570 Series Service Manual

Mfps & printers
Hide thumbs Also See for iR4570 Series:
Table of Contents

Advertisement

- Toner Bottle Warning Label
1) Open the front cover [1].
F-2-60
2) Attach the Toner Bottle warning label [1] of the
appropriate language behind [2] the front cover.
[1]
F-2-61
- Ferrite Core (230V model only)
1) Fit the ferrite core [1] to the network cable [2].
Be sure to fit the ferrite core as follows to protect
against noise:
- Be sure to fit it as close to the joint between the
machine and the network cable as possible.
- The harness must be wound around the ferrite core
once before the core is fixed in place.
- The harness is not trapped by the ferrite core.
[2]
F-2-62
When installing the machine newly or when
replacing the harness, be sure not to leave behind
the ferrite core.
- Reversing Guide (iR3570/4570 model only)
1) Fit the reversing guide [1].
F-2-63
2.2.11 If Not Connected to
a Network
iR2270 / iR2870 / iR3570 / iR4570
Reference
If the machine is not connected to a network, its
control panel will indicate the message "Check the
Connection to the Network." To disable the message,
turn off the following user mode item:
Chapter 2
[1]
[2]
0007-6496
2-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir3570 seriesIr2870 seriesIr2270 series

Table of Contents