M
I
ANAGEMENT
NTERFACE
3.3.10 Trap Manager
Trap Flags
The Trap Flags page allows users to configure trap flag settings. To access this page, click
Management > Trap Manager > Trap Flags.
The following table describes the items in the previous menu.
Table 3-25. Management > Trap Manager > Trap Flags
Parameter
Authentication
Link Up/Down
Multiple Users
Spanning Tree
ACL Traps
Submit
Trap Logs
Trap Logs displays the entries in the trap log. To access this page, click Management >
Trap Manager > Trap Logs.
66
Figure 3-27. Management > Trap Manager > Trap Flags
Click the drop-down menu to enable or disable activation of authentication failure
traps. The default is Enable.
Click the drop-down menu to enable or disable activation of link status traps. The
default is Enable.
Click the drop-down menu to enable or disable activation of multiple user traps.
The default is Enable.
Click the drop-down menu to enable or disable activation of spanning tree traps.
The default is Enable.
Click the drop-down menu to enable or disable activation of ACL traps. The default
is Disable.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Figure 3-28. Management > Trap Manager > Trap Logs
Description