Advantech EKI-9316P Series User Manual page 146

M I
ANAGEMENT NTERFACE
Table 3-87. Switching > Interface Statistics > Interface Detail Statistics (Continued)
Parameter
Packets RX and TX
512-1023 Octets
Packets RX and TX
1024-1518 Octets
Packets RX and TX
1519-2047 Octets
Packets RX and TX
2048-4095 Octets
Packets RX and TX
4096-9216 Octets
Total Packets
Received (Octets)
Packets Received 64 Displays the total number of received packets that are 64 octets in length.
Octets
Packets Received
65-127 Octets
Packets Received
128-255 Octets
Packets Received
256-511 Octets
Packets Received
512-1023 Octets
Packets Received
1024-1518 Octets
Packets Received >
1518 Octets
Total Packets
Received Without
Errors
Unicast Packets
Received
134
Displays the total number of packets (including bad packets) received or transmit-
ted that were between 512 and 1023 octets in length inclusive (excluding framing
bits but including FCS octets).
Displays the total number of packets (including bad packets) received or transmit-
ted that were between 1024 and 1518 octets in length inclusive (excluding framing
bits but including FCS octets).
Displays the total number of packets (including bad packets) received or transmit-
ted that were between 1519 and 2047 octets in length inclusive (excluding framing
bits but including FCS octets).
Displays the total number of packets (including bad packets) received or transmit-
ted that were between 2048 and 4095 octets in length inclusive (excluding framing
bits but including FCS octets).
Displays the total number of packets (including bad packets) received or transmit-
ted that were between 4096 and 9216 octets in length inclusive (excluding framing
bits but including FCS octets).
Displays the total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including FCS octets). This
object can be used as a reasonable estimate of ethernet utilization. If greater preci-
sion is desired, the etherStatsPkts and etherStatsOctets objects should be sampled
before and after a common interval.
Displays the total number of received packets that are 65 to 127 octets in length
(excluding framing bits, including FCS octets).
Displays the total number of received packets that are 128 to 255 octets in length
(excluding framing bits, including FCS octets).
Displays the total number of received Packets that are 256 To 511 octets in length
(excluding framing bits, including FCS octets).
Displays the total number of received Packets that are 512 to 1023 octets in length
(excluding framing bits, including FCS octets).
Displays the total number of received Packets that are 1024 to 1518 octets in
length (excluding framing bits, including FCS octets).
Displays the total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well formed.
Displays the total number of packets received that were without errors.
Displays the number of sub network unicast packets delivered to a higher layer
protocol.
Description