Advantech EKI-9316P Series User Manual page 127

The following table describes the items in the previous menu.
Table 3-73. Switching > MAC Address Table > MAC Filtering > Configuration
Parameter
MAC Filter
VLAN ID
MAC Address
Source Port Mem-
bers
Destination Port
Members
Submit
Delete
Delete All
Status
The MAC Filter Summary page displays the VLAN ID and assigned source port members and
destination member for each MAC address created. To view this page, click Switching
> MAC Address Table > MAC Filtering > Status.
Figure 3-76. Switching > MAC Address Table > MAC Filtering > Status
Click the drop-down menu to list of created MAC address entries or create a new
entry. To change the port mask(s) for an existing filter, select the entry you want to
change. To add a new filter, select "Create" from the top of the list.
Click the drop-down menu to select the VLAN ID to associate with the selected
MAC address to fully identify packets you want filtered. You can only change this
field when you have selected the "Create" option.
Enter the MAC address of the filter in the format 00:01:1A:B2:53:4D. You can only
change this field when you have selected the "Create" option.
You cannot define filters for these MAC addresses:
00:00:00:00:00:00

01:80:C2:00:00:00 to 01:80:C2:00:00:0F

01:80:C2:00:00:20 to 01:80:C2:00:00:21

FF:FF:FF:FF:FF:FF

Select the source port to include in the inbound filter. If a packet with the MAC
address and VLAN ID you selected is received on a port that is not in the list, it will
be dropped.
Select the destination port to include in the outbound filter. Packets with the MAC
address and VLAN ID you selected will only be transmitted out of ports that are in
the list.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Delete to remove the currently selected filter.
Click Remove All to delete all create configured filters.
M
ANAGEMENT
Description
I
NTERFACE
115