Class Configuration - Advantech EKI-9316P Series User Manual

Class Configuration

The Class Configuration page allows users to configure criteria for each class. To
access this page, click QoS > Differentiated Services > Class Configuration.
Figure 3-195. QoS > Differentiated Services > Class Configuration
The following table describes the items in the previous menu.
Table 3-192. QoS > Differentiated Services > Class Configuration
Parameter
Class Selector
Class Name
Class Type
Class Layer 3 Proto-
col
Class Match Selector Click the drop-down menu to select a match criteria to a selected class.
Match Criteria
Values
Submit
Cancel
Click the drop-down menu to create or configure an existing class.
Enter a class name (between 1 to 31 alphanumerics, case-sensitive, default is not
available)
Displays the selected class type.
Click the drop-down menu to select or display the protocol to indicate how to inter-
pret any layer 3.
The options are:
IPv4

IPv6

If the specified class does not reference any other class, the 'Reference Class'

match criterion is included in the drop down match criteria list. A class refer-
ence can be established by selecting 'Reference Class' and invoking the 'Add
Match Criteria' button.
If the specified class references another class, the 'Reference Class' match cri-

terion is not included in the drop down match criteria list. This prevents the user
from trying to add yet another class reference, since a specified class can refer-
ence at most one other class of the same type. Moreover, a 'Remove Refer-
ence Class' button appears on the screen that can be invoked to remove the
current class reference.
Displays the configured match criteria for the specified class.
Displays the values of the configured match criteria.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Click Cancel to discard the changes made on the page.
M
ANAGEMENT
Description
I
NTERFACE
249