Spanning Tree - Advantech EKI-9316P Series User Manual

3.4.10 Spanning Tree

Global Configuration/Status
The Spanning Tree Switch Configuration/Status page allows users to configure the settings
for the spanning tree. To access this page, click Switching > Spanning Tree > Global
Con-figuration/Status.
Figure 3-115. Switching > Spanning Tree > Global Configuration/Status
The following table describes the items in the previous menu.
Table 3-112. Switching > Spanning Tree > Global Configuration/Status
Parameter
Spanning Tree
Admin Mode
Force Protocol Ver-
sion
Configuration Name
Configuration Revi-
sion Level
Configuration Digest
Key
MST ID
VID
FID
Submit
Refresh
Click to the drop-down menu to enable or disable the spanning tree operation.
Click to the drop-down menu to specify the Force Protocol Version parameter for
the switch, options: IEEE 802.1d, IEEE 802.1w and IEEE 802.1s.
Enter the identifier used to identify the configuration currently being used. It may be
up to 31 characters, default: MAC address.
Enter the identifier used to identify the configuration currently being used. The val-
ues allowed are between 0 and 65535 (default: 0).
Displays the identifier used to identify the configuration currently being used.
Displays the table consisting of the MST instances (including the CST) and the cor-
responding VLAN IDs associated with each of them.
Displays the table consisting of the VLAN IDs and the corresponding FID.
Displays the table consisting of the FIDs and the corresponding VLAN IDs associ-
ated with each of them.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
M
ANAGEMENT
Description
I
NTERFACE
165