Table of Contents
Advertisement
M
I
ANAGEMENT
NTERFACE
The following table describes the items in the previous menu.
Table 3-93. Switching > VLAN Setting > Port-based VLAN > Configuration
Parameter
Interface
Port VLAN ID
Acceptable Frame
Type
Ingress Filtering
Port Priority
Submit
146
Click the drop-down menu to select the physical interface for which you want to dis-
play or configure data. Select 'All' to set the parameters for all ports to same values.
Enter the VLAN ID you want assigned to untagged or priority tagged frames
received on this port. The value ranges 1 to 4093. The factory default is 1.
Click the drop-down menu to specify the port to handle untagged and priority
tagged frames. If you select 'AdmitTaggedOnly', the port will discard any untagged
or priority tagged frames it receives. If you select 'AdmitUntaggedOnly', the port
discard tagged frames it receives. If you select 'Admit All', untagged and priority
tagged frames received on the port will be accepted and assigned the value of the
Port VLAN ID for this port. Whichever you select, VLAN tagged frames will be for-
warded in accordance with the IEEE 802.1Q VLAN standard. The factory default is
Admit All.
Click the drop-down menu to specify how you want the port to handle tagged
frames. If you enable Ingress Filtering on the pull-down menu, a tagged frame will
be discarded if this port is not a member of the VLAN identified by the VLAN ID in
the tag. If you select disable from the pull-down menu, all tagged frames will be
accepted. The factory default is Disable.
Enter the value to specify the default 802.1p priority assigned to untagged packets
arriving at the port. The value ranges from 0 to 7.Default value is 0.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Description
Advertisement
Table of Contents
