Advantech EKI-9316P Series User Manual page 188

M I
ANAGEMENT NTERFACE
Table 3-120. Multicast > IGMP Snooping > Interface Configuration (Continued)
Parameter
Group Membership
Interval
Max Response Time
(Less Than Group
Membership Interval) The valid range is 1 to 25 seconds. Enter a value greater or equal to 1 and less
Multicast Router
Present Expiration
Time
Fast Leave Admin
Mode
Submit
VLAN Status
The IGMP Snooping VLAN Status displays the summary of the IGMP snooping
configuration. To access this page, click Multicast > IGMP Snooping > VLAN Status.
Figure 3-124. Multicast > IGMP Snooping > VLAN Status
The following table describes the items in the previous menu.
Table 3-121. Multicast > IGMP Snooping > VLAN Status
Parameter
VLAN ID
Admin Mode
Fast Leave Admin
Mode
Group Membership
Interval (secs)
176
Enter the amount of time you want the switch to wait for a report for a particular
group on a particular interface before it deletes that interface from the group. The
valid range is from 2 to 3600 seconds. The default value is 260 seconds. The con-
figured value must be greater than the Max Response Time.
Enter the amount of time you want the switch to wait after sending a query on an
interface because it did not receive a report for a particular group on that interface.
than the Group Membership Interval in seconds. The default is 10 seconds. The
configured value must be less than the Group Membership Interval.
Enter the amount of time you want the switch to wait to receive a query on an inter-
face before removing it from the list of interfaces with multicast routers attached.
Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of
zero indicates an infinite timeout, i.e. no expiration.
Click the drop-down menu to enable or disable the Fast Leave mode for the a par-
ticular interface from the pull-down menu. The default is Disable.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Displays all VLAN IDs for which the IGMP Snooping mode is Enabled.
Displays IGMP Snooping Mode for VLAN ID.
Displays the Fast Leave Mode for VLAN ID.
Displays the Group Membership Interval of IGMP Snooping for the specified VLAN
ID. Valid range is 2 to 3600 seconds. Its value should be greater than maximum
response time.
Description
Description