M
I
ANAGEMENT
NTERFACE
Table 3-58. Management > LLDP > LLDP-MED > Remote Device Information (Continued)
Parameter
Network Policy Infor- Displays the network policy TLV is received in the LLDP frames on this port.
mation
Inventory Informa-
tion
Location Information Displays location TLV is received in LLDP frames on this port.
Extended PoE
Extended PoE PSE
100
Media Application Type - Specifies the application type. Types of application
types are unknown, voice signalling, guest voice, guest voice signalling, soft-
phone voice, video conferencing, streaming video, video signalling. Each
application type that is received has the VLAN ID, priority, DSCP, tagged bit
status and unknown bit status. A port may receive one or many such
application types. If a network policy TLV has been receive on this port only
then would this information be displayed.
VLAN ID - Specifies the VLAN ID associated with a particular policy type.
Priority - Specifies the priority associated with a particular policy type.
DSCP - Specifies the DSCP associated with a particular policy type.
Unknown Bit Status - Specifies the unknown bit associated with a particular pol-
icy type.
Tagged Bit Status - Specifies the tagged bit associated with a particular policy
type.
Displays the inventory TLV is received in LLDP frames on this port.
Hardware Revision - Specifies hardware version of the remote device.
Firmware Revision - Specifies Firmware version of the remote device.
Software Revision - Specifies Software version of the remote device.
Serial Number - Specifies serial number of the remote device.
Manufacturer Name - Specifies manufacturers name of the remote device.
Model Name - Specifies model name of the remote device.
Asset ID - Specifies asset ID of the remote device.
Sub Type - Specifies type of location information.
Location Information - Specifies the location information as a string for given
type of location id.
Specifies if remote device is a PoE device.
Device Type - Specifies remote device's PoE device type connected to this
port.
Displays extended PSE TLV is received in LLDP frame on this port.
Available - Specifies the remote ports PSE power value in tenths of watts.
Source - Specifies the remote ports PSE power source.
Priority - Specifies the remote ports PSE power priority.
Description