Transceiver Status - Advantech EKI-9316P Series User Manual

The following table describes the items in the previous menu.
Table 3-83. Switching > Interface Setting > Interface Description
Parameter
Interface
Port Description
Interface
Physical Address
Port List Bit Offset
Interface Index
Port Description
Submit
Refresh

Transceiver Status

The Transceiver Information page displays temperature, voltage, bias current, Tx power,
and RX power settings for each interface. To access this page, click Switching >
Interface Setting > Transceiver Status.
Figure 3-86. Switching > Interface Setting > Transceiver Status
The following table describes the items in the previous menu.
Table 3-84. Switching > Interface Setting > Transceiver Status
Parameter
Interface
Temperature
Voltage
Bias Current
Tx Power
Rx Power
Click the drop-down menu to select the interface for which data is to be displayed
or configured.
Enter the Description string to be attached to a port. It can be up to 64 characters in
length.
Displays the port type/number for the list entry.
Displays the physical address of the specified interface.
Displays the bit offset value which corresponds to the port when the MIB object
type Port List is used to manage in SNMP.
Displays the interface index associated with the port.
Description string attached to a port. It can be of up to 64 characters in length.
Click Submit the switch with the values on the screen. If you want the switch to
retain the new values across a power cycle you must perform a save.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
Displays the port.
Displays the internal temperature of the transceiver measured value.
Displays the supply voltage of the transceiver measured value.
Displays the bias current of the transceiver measured value.
Displays the transmission power of the transceiver measured value.
Displays the received power of the transceiver measured value.
M
ANAGEMENT
Description
Description
I
NTERFACE
127