Advantech EKI-9316P Series User Manual page 256

M I
ANAGEMENT NTERFACE
Table 3-187. QoS > Access Control Lists > MAC Access Control Lists > Rule
Configuration (Continued)
Parameter
From
To
Secondary VLAN
Submit
Delete
Interface Configuration
The Interface Configuration page allows users to configure settings for each ACL interface. To
access this page, click QoS > Access Control Lists > Interface Configuration.
Figure 3-191. QoS > Access Control Lists > Interface Configuration
The following table describes the items in the previous menu.
Table 3-188. QoS > Access Control Lists > Interface Configuration
Parameter
Interface
Direction
ACL Type
244
Click Configure and enter the secondary VLAN ID (between 0 to 4095) to compare
against an Ethernet frame.
Click Configure and enter the secondary VLAN ID (between 0 to 4095) to compare
against an Ethernet frame.
Click Configure and enter the secondary VLAN ID (between 0 to 4095) to compare
against an Ethernet frame.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Click Remove to remove the selected rule. To save the values across a power
cycle perform a system save.
Click the drop-down menu to select the interface for ACL mapping.
Click the drop-down menu to select the packet filtering direction for ACL.
The options are:
Inbound

Outbound

Click the drop-down menu to select the type of ACL.
The options are:
IP ACL

MAC ACL

IPv6 ACL

Description
Description